Bonjour ,  
je suis novice sur linux
J'ai installer la mandrake 10.0 official
Mon probleme repose pour installer le pilote afin de me permette d'installer mes port ide suplementaire qui sont sur la p4p800 deluxe
j'ai telecharger le pilote ensuite  
je le decompresse  
je fais un make , et la des messages d'erreur
pourkoi snif!!
pourriez vous m'expliquer la methode pas a pas pour installer ce pilote merci  

Attends un peu, le temps qu'on devine le message d'erreur qui est apparu sur ton écran

voila le millieu du message d'erreur
viapubraid.c: In function `viaraid_intr':
viapubraid.c:85: error: `io_request_lock' undeclared (first use in this function
)
viapubraid.c: At top level:
viapubraid.c:94: error: parse error before '*' token
viapubraid.c:94: error: parse error before '*' token
viapubraid.c:111: warning: type defaults to `int' in declaration of `viaraid_req
_last'
viapubraid.c:111: error: conflicting types for `viaraid_req_last'
viapubraid.c:25: error: previous declaration of `viaraid_req_last'
viapubraid.c:111: error: `SCpnt' undeclared here (not in a function)
viapubraid.c:111: warning: data definition has no type or storage class
viapubraid.c:112: error: parse error before "do"
viapubraid.c:112: error: `flags' undeclared here (not in a function)
viapubraid.c:112: warning: type defaults to `int' in declaration of `__dummy2'
viapubraid.c:112: error: parse error before "void"
viapubraid.c:129: error: parse error before '*' token
viapubraid.c: In function `internal_done':
viapubraid.c:131: error: `SCpnt' undeclared (first use in this function)
viapubraid.c: At top level:
viapubraid.c:139: error: parse error before '*' token
viapubraid.c: In function `viaraid_Command':
viapubraid.c:143: error: `SCpnt' undeclared (first use in this function)
viapubraid.c:144: warning: implicit declaration of function `viaraid_QueueComman
d'
viapubraid.c:149: error: `DID_ERROR' undeclared (first use in this function)
viapubraid.c: At top level:
viapubraid.c:154: error: parse error before '*' token
viapubraid.c: In function `viaraid_Detect':
viapubraid.c:163: warning: implicit declaration of function `pci_present'
viapubraid.c:179: warning: implicit declaration of function `scsi_register'
viapubraid.c:179: error: `tpnt' undeclared (first use in this function)
viapubraid.c:179: warning: assignment makes pointer from integer without a cast
viapubraid.c:180: error: dereferencing pointer to incomplete type
viapubraid.c:181: error: dereferencing pointer to incomplete type
viapubraid.c:182: error: dereferencing pointer to incomplete type
viapubraid.c:183: error: dereferencing pointer to incomplete type
viapubraid.c:184: error: dereferencing pointer to incomplete type
viapubraid.c:185: error: dereferencing pointer to incomplete type
viapubraid.c:186: error: dereferencing pointer to incomplete type
viapubraid.c: At top level:
viapubraid.c:222: error: conflicting types for `viaraid_Release'
viaprvdef.h:88: error: previous declaration of `viaraid_Release'
viapubraid.c: In function `viaraid_Release':
viapubraid.c:234: error: dereferencing pointer to incomplete type
viapubraid.c:235: warning: implicit declaration of function `scsi_unregister'
viapubraid.c: At top level:

et voila le fichier txt pour l'installer
 
------------------------------------------------------------          
               Copyright (c) 2002-2003 VIA Technologies Inc.              
                                                                         
             VIA RAID Linux Driver Software Package ReadMe.txt                                  
                                                                         
    This readme file is to provide the information of VIA RAID Linux Driver
    Package. VIA Technologies assumes no responsibility for any errors in
    this document and no part of this document may be reproduced, transmitted,
    or translated into any language,or in any form without the prior written  
    permission of VIA Technologies Incorporated.
   
              Package Version 1.00 / ReadMe Version 1.00                                                              
-------------------------------------------------------------------------------
  This RAID driver can now support 3 kind of VIA RAID Controllers, include  
VT6410,VT6420/8237, VT6421. It supports RAID type 0, 1, span, 0+1(needs 4 hard disk).  
  VIA VT6410 is a ATA RAID controller, supports up to four ATA hard disks.
  VIA VT6420/8237 is a SATA RAID controller.
  VIA VT6421 supports two SATA and two ATA hard disks.
  This "VIA RAID Linux Driver Package" is provided for drivers installations,
which are needed when using the above VIA RAID Controllers.
 
 
                             CONTENTS
     ============================================
 1)  System Requirements
 2)  Software Package Contents
 3)  Driver Installation
 4)  Install Operating System RedHat linux
 5)  Notes
     ============================================
 
 1) System Requirements
 
    You should have at least one VIA RAID controller.
 
    System BIOS must integrates VIA RAID BIOS if you want to install OS
    on RAID Controller.
 
    Supports up to four hard disk drives, which all support LBA address.
 
    Supports the following Operating Systems:
      Linux
 
 2) Software Package Contents  
 
    The decompressed software package includes the following files:  
 
 /Driver
    viapubraid.c  viamraid open source file
    viapubraid.h
    viaprvdef.h  
    viaprvmraid.o    viamraid library file
    viaprvraidm64.o  lib file for SuSE 64 bit
    Makefile      Makefile
    dd.sh        script to make RedHat driver disk
    patch.pl     patch script for Mandrake 9.2 driver disk.
    PACKAGES.PY    for RedHat 7.2 update disk only    
    driverdisk.txt A document about how do I install Linux onto the RAID
 
 ReadMe.txt      This file, provides information on this Linux Driver Package
 
 
 3)  Driver Installation
     
    =========================
    == Driver Installation ==
    =========================
 *Pre-Install
    The package include source code files, so we need to compile a driver  
  according to your kernel version.
    Before begin to compile, make sure that
      1. You have installed the kernel source package
      2. Kernel source default directory is /usr/src/linux, please check it.
         If your default kernel source directory is not /usr/src/linux,  
         create a link:
           # ln -s linux2.4 linux
      3. Assume you have unzip this package to a diretory /tmp/viamraid
 *Compile/Install
    1. compile the file, viamraid.o is the driver we need
        # cd /tmp/viamraid/driver
        # make
       
    2. Install the driver
        # make install
     
    3. To use the driver, type:
        #modprobe viamraid
       If there are no other SCSI cards on the system, /dev/sda, sdb ... are  
     our devices.
 
    4. To unuse the driver, type:
        #rmmod viamraid
   

à tout hasard... tu as bien installé les kernel-source, hein ???

Ouiii je les ais installer et je les mis ds le repertoire
\usr\src\linux2.66 avec un lien ds le meme repertoire au nom de linux

ok j'ai trouvé n en faite j'explique , ma carte est incomptaible avec linux mandrak  le pilote fournit sur internet fonctionne que pour redhart et que pour la version 9.1 lol snif tampis......