alors la j'ai un drole de pbm mais qui me gave a mort
 
j'ai tout configuré mon serveur de mail pour que l'envoi se fasse a travers une machine avec un serveur smtp (c mon exim qui stock les mails mais pour les envoyer il contact une autre machine = relaying je pense)
je fais parti d'un domaine (que l'on va appelé bac.com)
 
ma machine avec un serveur smtp est sur un autre domaine (cbf.com)
 
alors lorsque j'envoi un mail a une personne local il n'y a pas de pbm
de meme lorsque j'envoi un mail a une personne du domaine cbf.com pas de pbm non plus  
mais par contre quand j'envoi un mail a une personne exterieur (ifrance, caramail ....) ben la il me met un message d'erreur :
 
2001-08-03 16:32:48 15SDuS-00006P-00 == athor25@ifrance.com T = remote_smtp defer (-44) : retry time not reached for any host

 
c vraiment trop bizzard  
 
vous avez pas une solution, voir meme une explication
 
merci d'avance
 
(PS: ce que je capte pas non plus c'est que j'ai une autre machine sous exim qui est sous le meme domaine que le serveur smtpet la il n'y a pas de pbm pour envoyer tous les mails a toutes les @ possiibles)

ben recopies le fichier de conf !!

#ton domaine
qualify_domain = cbf.com
 
queue_remote_domains = ! *.localnet
 
#les domaines locaux
local_domains = localhost:serveurtest.cbf.com:serveurtest:cbf.com
 
# Allow mail addressed to our hostname, or to our IP address.
 
local_domains_include_host = true
local_domains_include_host_literals = true
 
#les domaines qu'on relaye si t'en as plusieurs tu mets : entre eux
relay_domains = *
 
# If this is uncommented, we accept and relay mail for all domains we are  
# in the DNS as an MX for.
 
#relay_domains_include_local_mx = true
 
#tu veux pas de mail pour ces utilisateurs via exim
#never_users = root
 
#dès que ta une requete smtp tu peux vérifier par le dns l'expéditeur
#host_lookup = *
 
# Exim contains support for the Realtime Blocking List (RBL) that is being  
# maintained as part of the DNS. See http://maps.vix.com/rbl/ for background.
# Uncommenting the following line will make Exim reject mail from any
# host whose IP address is blacklisted in the RBL at maps.vix.com.
 
#rbl_domains = rbl.maps.vix.com
#rbl_reject_recipients = false
#rbl_warn_header = true
 
# The setting below allows your host to be used as a mail relay by only
# the hosts in the specified networks. See the section of the manual
# entitled "Control of relaying" for more info.
 
#host_accept_relay = localhost : 192.168.0.4
 
# If you want Exim to support the "percent hack" for all your local domains,
# uncomment the following line. This is the feature by which mail addressed
# to x%y@z (where z is one of your local domains) is locally rerouted to
# x@y and sent on. Otherwise x%y is treated as an ordinary local part
 
# percent_hack_domains=*
 
# If this option is set, then any process that is running as one of the
# listed users may pass a message to Exim and specify the sender's
# address using the "-f" command line option, without Exim's adding a
# "Sender" header.
 
trusted_users = mail
 
# If this option is true, the SMTP command VRFY is supported on incoming
# SMTP connections; otherwise it is not.
 
smtp_verify = true
 
# Some operating systems use the "gecos" field in the system password file
# to hold other information in addition to users' real names. Exim looks up
# this field when it is creating "sender" and "from" headers. If these options
# are set, exim uses "gecos_pattern" to parse the gecos field, and then
# expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
# by the pattern.
 
gecos_pattern = ^([^,:]*)
gecos_name = $1
 
# This sets the maximum number of messages that will be accepted in one
# connection. The default is 10, which is probably enough for most purposes,
# but is too low on dialup SMTP systems, which often have many more mails
# queued for them when they connect.
 
smtp_accept_queue_per_connection = 100
 
# Send a mail to the postmaster when a message is frozen. There are many
# reasons this could happen; one is if exim cannot deliver a mail with no
# return address (normally a bounce) another that may be common on dialup
# systems is if a DNS lookup of a smarthost fails. Read the documentation
# for more details: you might like to look at the auto_thaw option
 
freeze_tell_mailmaster = true
 
# This string defines the contents of the \`Received' message header that
# is added to each message, except for the timestamp, which is automatically
# added on at the end, preceded by a semicolon. The string is expanded each
# time it is used.
 
received_header_text = "Received: \
         ${if def:sender_rcvhost {from ${sender_rcvhost}\n\t}\
         {${if def:sender_ident {from ${sender_ident} }}\
         ${if def:sender_helo_name {(helo=${sender_helo_name})\n\t}}}}\
         by ${primary_hostname} \
         ${if def:received_protocol {with ${received_protocol}}} \
         (Exim ${version_number} #${compile_number} (Debian))\n\t\
         id ${message_id}\
         ${if def:received_for {\n\tfor <$received_for>}}"
end
 
 
##################################################
####################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
#                       ORDER DOES NOT MATTER                        #
#     Only one appropriate transport is called for each delivery.    #
######################################################################
 
# This transport is used for local delivery to user mailboxes. On debian
# systems group mail is used so we can write to the /var/spool/mail
# directory. (The alternative, which most other unixes use, is to deliver
# as the user's own group, into a sticky-bitted directory)
 
local_delivery:
  driver = appendfile
  group = mail
  mode = 0660
  mode_fail_narrower = false
  envelope_to_add = true
  file = /var/mail/${local_part}
#file = /usr/mail/${local_part}  
#file = /var/spool/mail/${local_part}
 
# This transport is used for handling pipe addresses generated by alias
# or .forward files. It has a conventional name, since it is not actually
# mentioned elsewhere in this configuration file. (A different name *can*
# be specified via the "address_pipe_transport" option if you really want
# to.) If the pipe generates any standard output, it is returned to the sender
# of the message as a delivery error. Set return_fail_output instead if you
# want this to happen only when the pipe fails to complete normally.
 
address_pipe:
  driver = pipe
  return_output
 
# This transport is used for handling file addresses generated by alias
# or .forward files. It has a conventional name, since it is not actually
# mentioned elsewhere in this configuration file.
 
address_file:
  driver = appendfile
 
# This transport is used for handling file addresses generated by alias
# or .forward files if the path ends in "/", which causes it to be treated
# as a directory name rather than a file name. Each message is then delivered
# to a unique file in the directory. If instead you want all such deliveries to
# be in the "maildir" format that is used by some other mail software,
# uncomment the final option below. If this is done, the directory specified
# in the .forward or alias file is the base maildir directory.
#
# Should you want to be able to specify either maildir or non-maildir
# directory-style deliveries, then you must set up yet another transport,
# called address_directory2. This is used if the path ends in "//" so should
# be the one used for maildir, as the double slash suggests another level
# of directory. In the absence of address_directory2, paths ending in //
# are passed to address_directory.
 
address_directory:
  driver = appendfile
  no_from_hack
  prefix = ""
  suffix = ""
# maildir_format
 
# This transport is used for handling autoreplies generated by the filtering
# option of the forwardfile director. It has a conventional name, since it
# is not actually mentioned elsewhere in this configuration file.
 
address_reply:
  driver = autoreply
 
# This transport is used for delivering messages over SMTP connections.
 
remote_smtp:
  driver = smtp
 
end
 
 
######################################################################
#                      DIRECTORS CONFIGURATION                       #
#             Specifies how local addresses are handled              #
######################################################################
#                          ORDER DOES MATTER                         #
#   A local address is passed to each in turn until it is accepted.  #
######################################################################
 
# This allows local delivery to be forced, avoiding alias files and
# forwarding.
 
real_local:
  prefix = real-
  driver = localuser
  transport = local_delivery
 
# This director handles aliasing using a traditional /etc/aliases file.
# If any of your aliases expand to pipes or files, you will need to set
# up a user and a group for these deliveries to run under. You can do
# this by uncommenting the "user" option below (changing the user name
# as appropriate) and adding a "group" option if necessary.
 
system_aliases:
  driver = aliasfile
  file_transport = address_file
  pipe_transport = address_pipe
  file = /etc/aliases
  search_type = lsearch
# user = list
# Uncomment the above line if you are running smartlist
 
# This director handles forwarding using traditional .forward files.
# It also allows mail filtering when a forward file starts with the  
# string "# Exim filter": to disable filtering, uncomment the "filter"  
# option. The check_ancestor option means that if the forward file  
# generates an address that is an ancestor of the current one, the  
# current one gets passed on instead. This covers the case where A is  
# aliased to B and B has a .forward file pointing to A.
 
# For standard debian setup of one group per user, it is acceptable---normal
# even---for .forward to be group writable. If you have everyone in one
# group, you should comment out the "modemask" line. Without it, the exim
# default of 022 will apply, which is probably what you want.
 
userforward:
  driver = forwardfile
  file_transport = address_file
  pipe_transport = address_pipe
  reply_transport = address_reply
  no_verify
  check_ancestor
  file = .forward
  modemask = 002
  filter
 
# This director matches local user mailboxes.
 
localuser:
  driver = localuser
  transport = local_delivery
 
end
 
 
######################################################################
#                      ROUTERS CONFIGURATION                         #
#            Specifies how remote addresses are handled              #
######################################################################
#                          ORDER DOES MATTER                         #
#  A remote address is passed to each in turn until it is accepted.  #
######################################################################
 
# Remote addresses are those with a domain that does not match any item
# in the "local_domains" setting above.
 
# This router routes to remote hosts over SMTP using a DNS lookup with
# default options.
 
lookuphost:
  driver = lookuphost
  transport = remote_smtp
 
# This router routes to remote hosts over SMTP by explicit IP address,
# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
# require this facility, which is why it is enabled by default in Exim.
# If you want to lock it out, set forbid_domain_literals in the main
# configuration section above.
 
literal:
  driver = ipliteral
  transport = remote_smtp
 
end
 
 
######################################################################
#                      RETRY CONFIGURATION                           #
######################################################################
 
# This single retry rule applies to all domains and all errors. It specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 2 hours and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 8 hours until 4 days have passed since the first
# failed delivery.
 
# Domain               Error       Retries
# ------               -----       -------
 
*                      *           F,2h,15m; G,16h,2h,1.5; F,4d,8h
 
end
 
 
######################################################################
#                      REWRITE CONFIGURATION                         #
######################################################################
 
 
# There are no rewriting specifications in this default configuration file.
 
 
# This is an example of a useful rewriting rule---it looks up the real
# address of all local users in a file
 
# *@serveur    ${lookup{$1}lsearch{/etc/email-addresses}\
#      {$value}fail} bcfrF
 
# End of Exim configuration file
 
 
 
 
 
 
ca c le fichier qui marche sur ma machine de test

le fichie qui marche sur ma machine de test marche pas du tout sur mon nouveau serveur (celui que j'essaye de configurer)
 
alors je l'ai quelque peu modifié
 
#ton domaine
qualify_domain = cbf.com
 
queue_remote_domains = ! *.localnet
 
#les domaines locaux
local_domains = localhost:breva.cbf.com:breva
 
# Allow mail addressed to our hostname, or to our IP address.
 
local_domains_include_host = true
local_domains_include_host_literals = true
 
#les domaines qu'on relaye si t'en as plusieurs tu mets : entre eux
relay_domains = *
 
# If this is uncommented, we accept and relay mail for all domains we are  
# in the DNS as an MX for.
 
relay_domains_include_local_mx = true
 
#tu veux pas de mail pour ces utilisateurs via exim
#never_users = root
 
#dès que ta une requete smtp tu peux vérifier par le dns l'expéditeur
#host_lookup = *
 
# Exim contains support for the Realtime Blocking List (RBL) that is being  
# maintained as part of the DNS. See http://maps.vix.com/rbl/ for background.
# Uncommenting the following line will make Exim reject mail from any
# host whose IP address is blacklisted in the RBL at maps.vix.com.
 
#rbl_domains = rbl.maps.vix.com
#rbl_reject_recipients = false
#rbl_warn_header = true
 
# The setting below allows your host to be used as a mail relay by only
# the hosts in the specified networks. See the section of the manual
# entitled "Control of relaying" for more info.
 
#host_accept_relay = localhost : 192.168.0.4
 
# If you want Exim to support the "percent hack" for all your local domains,
# uncomment the following line. This is the feature by which mail addressed
# to x%y@z (where z is one of your local domains) is locally rerouted to
# x@y and sent on. Otherwise x%y is treated as an ordinary local part
 
# percent_hack_domains=*
 
# If this option is set, then any process that is running as one of the
# listed users may pass a message to Exim and specify the sender's
# address using the "-f" command line option, without Exim's adding a
# "Sender" header.
 
trusted_users = mail
 
# If this option is true, the SMTP command VRFY is supported on incoming
# SMTP connections; otherwise it is not.
 
smtp_verify = true
 
# Some operating systems use the "gecos" field in the system password file
# to hold other information in addition to users' real names. Exim looks up
# this field when it is creating "sender" and "from" headers. If these options
# are set, exim uses "gecos_pattern" to parse the gecos field, and then
# expands "gecos_name" as the user's name. $1 etc refer to sub-fields matched
# by the pattern.
 
gecos_pattern = ^([^,:]*)
gecos_name = $1
 
# This sets the maximum number of messages that will be accepted in one
# connection. The default is 10, which is probably enough for most purposes,
# but is too low on dialup SMTP systems, which often have many more mails
# queued for them when they connect.
 
smtp_accept_queue_per_connection = 0
 
# Send a mail to the postmaster when a message is frozen. There are many
# reasons this could happen; one is if exim cannot deliver a mail with no
# return address (normally a bounce) another that may be common on dialup
# systems is if a DNS lookup of a smarthost fails. Read the documentation
# for more details: you might like to look at the auto_thaw option
 
freeze_tell_mailmaster = true
 
# This string defines the contents of the \`Received' message header that
# is added to each message, except for the timestamp, which is automatically
# added on at the end, preceded by a semicolon. The string is expanded each
# time it is used.
 
received_header_text = "Received: \
         ${if def:sender_rcvhost {from ${sender_rcvhost}\n\t}\
         {${if def:sender_ident {from ${sender_ident} }}\
         ${if def:sender_helo_name {(helo=${sender_helo_name})\n\t}}}}\
         by ${primary_hostname} \
         ${if def:received_protocol {with ${received_protocol}}} \
         (Exim ${version_number} #${compile_number} (Debian))\n\t\
         id ${message_id}\
         ${if def:received_for {\n\tfor <$received_for>}}"
end
 
 
##################################################
####################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
#                       ORDER DOES NOT MATTER                        #
#     Only one appropriate transport is called for each delivery.    #
######################################################################
 
# This transport is used for local delivery to user mailboxes. On debian
# systems group mail is used so we can write to the /var/spool/mail
# directory. (The alternative, which most other unixes use, is to deliver
# as the user's own group, into a sticky-bitted directory)
 
local_delivery:
  driver = appendfile
  group = mail
  mode = 0660
  mode_fail_narrower = false
  envelope_to_add = true
  file = /var/mail/${local_part}
#file = /usr/mail/${local_part}  
#file = /var/spool/mail/${local_part}
 
# This transport is used for handling pipe addresses generated by alias
# or .forward files. It has a conventional name, since it is not actually
# mentioned elsewhere in this configuration file. (A different name *can*
# be specified via the "address_pipe_transport" option if you really want
# to.) If the pipe generates any standard output, it is returned to the sender
# of the message as a delivery error. Set return_fail_output instead if you
# want this to happen only when the pipe fails to complete normally.
 
address_pipe:
  driver = pipe
  return_output
 
# This transport is used for handling file addresses generated by alias
# or .forward files. It has a conventional name, since it is not actually
# mentioned elsewhere in this configuration file.
 
address_file:
  driver = appendfile
 
# This transport is used for handling file addresses generated by alias
# or .forward files if the path ends in "/", which causes it to be treated
# as a directory name rather than a file name. Each message is then delivered
# to a unique file in the directory. If instead you want all such deliveries to
# be in the "maildir" format that is used by some other mail software,
# uncomment the final option below. If this is done, the directory specified
# in the .forward or alias file is the base maildir directory.
#
# Should you want to be able to specify either maildir or non-maildir
# directory-style deliveries, then you must set up yet another transport,
# called address_directory2. This is used if the path ends in "//" so should
# be the one used for maildir, as the double slash suggests another level
# of directory. In the absence of address_directory2, paths ending in //
# are passed to address_directory.
 
address_directory:
  driver = appendfile
  no_from_hack
  prefix = ""
  suffix = ""
# maildir_format
 
# This transport is used for handling autoreplies generated by the filtering
# option of the forwardfile director. It has a conventional name, since it
# is not actually mentioned elsewhere in this configuration file.
 
address_reply:
  driver = autoreply
 
# This transport is used for delivering messages over SMTP connections.
 
remote_smtp:
  driver = smtp
 
end
 
 
######################################################################
#                      DIRECTORS CONFIGURATION                       #
#             Specifies how local addresses are handled              #
######################################################################
#                          ORDER DOES MATTER                         #
#   A local address is passed to each in turn until it is accepted.  #
######################################################################
 
# This allows local delivery to be forced, avoiding alias files and
# forwarding.
 
real_local:
  prefix = real-
  driver = localuser
  transport = local_delivery
 
# This director handles aliasing using a traditional /etc/aliases file.
# If any of your aliases expand to pipes or files, you will need to set
# up a user and a group for these deliveries to run under. You can do
# this by uncommenting the "user" option below (changing the user name
# as appropriate) and adding a "group" option if necessary.
 
system_aliases:
  driver = aliasfile
  file_transport = address_file
  pipe_transport = address_pipe
  file = /etc/aliases
  search_type = lsearch
# user = list
# Uncomment the above line if you are running smartlist
 
# This director handles forwarding using traditional .forward files.
# It also allows mail filtering when a forward file starts with the  
# string "# Exim filter": to disable filtering, uncomment the "filter"  
# option. The check_ancestor option means that if the forward file  
# generates an address that is an ancestor of the current one, the  
# current one gets passed on instead. This covers the case where A is  
# aliased to B and B has a .forward file pointing to A.
 
# For standard debian setup of one group per user, it is acceptable---normal
# even---for .forward to be group writable. If you have everyone in one
# group, you should comment out the "modemask" line. Without it, the exim
# default of 022 will apply, which is probably what you want.
 
userforward:
  driver = forwardfile
  file_transport = address_file
  pipe_transport = address_pipe
  reply_transport = address_reply
  no_verify
  check_ancestor
  file = .forward
  modemask = 002
  filter
 
# This director matches local user mailboxes.
 
localuser:
  driver = localuser
  transport = local_delivery
 
end
 
 
######################################################################
#                      ROUTERS CONFIGURATION                         #
#            Specifies how remote addresses are handled              #
######################################################################
#                          ORDER DOES MATTER                         #
#  A remote address is passed to each in turn until it is accepted.  #
######################################################################
 
# Remote addresses are those with a domain that does not match any item
# in the "local_domains" setting above.
 
# This router routes to remote hosts over SMTP using a DNS lookup with
# default options.
 
lookuphost:
  driver = lookuphost
  transport = remote_smtp
 
# This router routes to remote hosts over SMTP by explicit IP address,
# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
# require this facility, which is why it is enabled by default in Exim.
# If you want to lock it out, set forbid_domain_literals in the main
# configuration section above.
 
literal:
  driver = ipliteral
  transport = remote_smtp
 
 
end
 
 
######################################################################
#                      RETRY CONFIGURATION                           #
######################################################################
 
# This single retry rule applies to all domains and all errors. It specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 2 hours and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 8 hours until 4 days have passed since the first
# failed delivery.
 
# Domain               Error       Retries
# ------               -----       -------
 
*                      *           F,2h,15m; G,16h,2h,1.5; F,4d,8h
 
end
 
 
######################################################################
#                      REWRITE CONFIGURATION                         #
######################################################################
 
 
# There are no rewriting specifications in this default configuration file.
 
 
# This is an example of a useful rewriting rule---it looks up the real
# address of all local users in a file
 
# *@serveur    ${lookup{$1}lsearch{/etc/email-addresses}\
#      {$value}fail} bcfrF
 
# End of Exim configuration file

est ce que ca vient de mon exim ou alors du serveur smtp relai ?

euh...là g moyenement envie et pas trop le temps de tout lire et de faire du débugging...
sorry

c plus la peine j'ai trouvé  
ca venais du loopback