Bonjour a tous,
 
Voila ce matin quand j'ai redermarrer ma machine voila ce que m'affiche le server x :
 
(**) S3: Monitor ID: "Generic Monitor"
(--) S3: Mode "640x350" needs vert refresh rate of 85.08 Hz. Deleted.
(--) S3: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
(--) S3: Mode "720x400" needs vert refresh rate of 85.04 Hz. Deleted.
(--) S3: Mode "640x480" needs vert refresh rate of 72.81 Hz. Deleted.
(--) S3: Mode "640x480" needs vert refresh rate of 75.00 Hz. Deleted.
(--) S3: Mode "640x480" needs vert refresh rate of 85.01 Hz. Deleted.
(--) S3: Mode "800x600" needs vert refresh rate of 72.19 Hz. Deleted.
(--) S3: Mode "800x600" needs vert refresh rate of 75.00 Hz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 53.72 kHz. Deleted.
(--) S3: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
Warning: The directory "/usr/lib/X11/fonts/CID" does not exist.
         Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/Speedo" does not exist.
         Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
         Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(--) S3: PCI: unknown (please report), ID 0x8c10 rev 12, Linear FB @ 0xf0000000
(--) S3: Unknown S3 chipset: chip_id = 0x8c10 rev. 12
 
 *** None of the configured devices were detected.***
 
 
Fatal server error:
no screens found
 
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
 
XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.
 
 
 
Est ce quelqu'un a deja eu ce probleme, car je sais pas du tous a koi sa correspond?
 
 
Merci d'avance

Pour une raison X ou Y ( ), la conf d'écran est mauvaise, il faut donc la refaire.

 
 
je refaisla config de xfree? on la fait ou la config?

si Mandrake, XFdrake
 
si Debian, apt-get reconfigure xfree-serveur
 
si autre : xfconfig

j'ai reussi a le reparer avec dpkg-reconfigure mais maintenant quand je basucle l'affichage en crt (ecran ordinateur) de mon portable j'ai pas le pointeur de la souris mais sur le portable oui.
 
Une idée???
 
Merci d'avance