Je viens de recevoir mon yamaha 16/10/40 IDE.  
Je mets à jour Nero et le wnaspi32.dll, je tente une gravure à partir du disque dur et il me sort une erreur atapi/scsi.  
voici le log :  
 
Windows NT 5.0  
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.16, size=151619 bytes, created 27/03/2001 12:37:28  
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.16, size=151619 bytes, created 27/03/2001 12:37:28  
Version Nero: 5.0.4.4  
Graveur:              <YAMAHA CRW2100E>         Version: 1.0H - HA 2 TA 1 - 5.0.4.4  
Pilote d'adaptateur: <viadsk>                  HA 2  
Drive buffer  :      8192kB  
CD-ROM:               <PIONEER  DVD-ROM DVD-104F>Version: 1.23 - HA 1 TA 1 - 5.0.4.4  
Pilote d'adaptateur: <viadsk>                  HA 1  
PIONEER DVD-ROM DVD-104F1.23    viadsk Port 1 ID 1  DMA:  ?  
YAMAHA  CRW2100E        1.0H    viadsk Port 2 ID 1  DMA:  ?  
AutoRun : 1  
CmdQueuing     : 1  
CmdNotification: 2  
WriteBufferSize: 134217728 (134217728) Byte  
ShowDrvBufStat : 0  
EraseSpeed     : 0  
BUFE           : 0  
Physical memory     : 511MB (523756kB)  
Free physical memory: 250MB (256900kB)  
Memory in use       : 50 %  
Uncached PFiles: 0x0  
Use Static Write Speed Table: 0  
Use Inquiry: 1  
Wizard: Off  
 
CD-ROM (ISO)  
27.3.2001  
 
12:40:15 #1 Text 0 File Reader.cpp, Line 116  
Reader running  
   
12:40:15 #2 Text 0 File Writer.cpp, Line 108  
Writer YAMAHA CRW2100E running  
   
12:40:15 #3 ISO9660GEN -11 File geniso.cpp, Line 3245  
First writeable address = 0 (0x00000000)  
   
12:40:15 #4 Text 0 File ThreadedTransferInterface.cpp, Line 644  
Setup items (original item values)  
  0: TRM_DATA_MODE1 (CTransferItem)  
     2 indices, index0 (150) not provided  
     original CD pos #0 + 327784 (327784) = #327784/72:50.34  
     relocatable, CD pos for caching/writing not required/required, no patch infos  
--------------------------------------------------------------  
   
12:40:17 #5 Text 0 File Burncd.cpp, Line 1661  
Recorder:  YAMAHA CRW2100E;  
    CDR code: 00 97 34 21; OSJ entry from: Mitsubishi Chemical  
    ATIP Data:  
      Special    Info [hex] 1: C0 00 98, 2: 61 22 15 (LI 97:34.21), 3: 4A 2B 00 (LO 74:43.00)  
      Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)  
   
12:40:17 #6 Text 0 File ThreadedTransferInterface.cpp, Line 778  
Prepare recorder YAMAHA CRW2100E for write in cue-sheet-DAO  
DAO infos:  
==========  
MCN:  
TOCTYPE: 0x0   Close CD  
Tracks 1 to 1:  
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 671608832  
   
12:40:17 #7 Text 0 File ThreadedTransferInterface.cpp, Line 644  
Setup items (after recorder preparation)  
  0: TRM_DATA_MODE1 (CTransferItem)  
     2 indices, index0 (150) not provided  
     original CD pos #0 + 327784 (327784) = #327784/72:50.34  
     relocatable, CD pos for caching/writing not required/required, no patch infos  
     -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 327784 blocks [YAMAHA CRW2100E]  
--------------------------------------------------------------  
   
12:40:17 #8 Phase 24 File dlgbrnst.cpp, Line 1193  
Début cache des fichiers  
   
12:40:17 #9 Phase 25 File dlgbrnst.cpp, Line 1193  
Cache des fichier terminé  
   
12:40:17 #10 Phase 32 File dlgbrnst.cpp, Line 1193  
Début de simulation à 16x (2400 Ko/s)  
   
12:40:17 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1765  
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0  
   
12:40:20 #12 SCSI -26 File Cdrdrv.cpp, Line 1333  
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x0D04007C  
Status:     0x82 (0x07, SCSI_NO_DEVICE)  
HA-Status   0x00 (0x00, OK)  
TA-Status   0x00 (0x00, OK)  
Sense Key:  0x00 (KEY_NO_SENSE)  
Sense Code: 0x00  
Sense Qual: 0x00  
CDB Data:   0xAA 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x00 0x1E 0x00 0x00  
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
             0x00 0x00 0x00 0x00 0x00 0x00  
   
12:40:20 #13 CDR -26 File Writer.cpp, Line 284  
SCSI/ATAPI command timeout error  
   
12:40:21 #14 Text 0 File ThreadedTransfer.cpp, Line 216  
all writers idle, stopping conversion  
   
12:40:21 #15 Text 0 File ThreadedTransfer.cpp, Line 210  
conversion idle, stopping reader  
   
12:40:21 #16 Phase 34 File dlgbrnst.cpp, Line 1193  
La simulation a échoué à 16x (2400 Ko/s)  
   
12:40:21 #17 Text 0 File Scsicmd.cpp, Line 311  
SCSI not using temporary buffers  
20 out of 20 temporary buffers allocated  
   
 
Existing drivers:  
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 10/04/2000 07:10:56  
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 10/04/2000 07:10:56  
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 03:02:46  
 
Merci d'avance pour votre aide car j'ai 60Go de données à graver.

salut il y a quelque temps j'ai eu un pb identique
verifie si ton systeme d'exploitation ne voit pas toute tes peripheriques en scsi , si c'est le cas il faut changer de drivers ATA, moi sous win2k j'ai été obligé de telecharger un driver ata100 chez intel .bon courage