Name Intel Pentium 4  
Code Name Northwood  
Specification Intel(R) Pentium(R) 4 CPU 2.66GHz  
Family / Model / Stepping F 2 9  
Extended Family / Model 0 0  
Brand ID 9  
Package mPGA-478  
Core Stepping D1  
Technology 0.13 µ  
Supported Instructions Sets MMX, SSE, SSE2  
CPU Clock Speed 2604.7 MHz  
Clock multiplier x 20.0  
Front Side Bus Frequency 130.2 MHz  
Bus Speed 520.9 MHz  
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size  
L1 Trace Cache 12 Kµops, 8-way set associative  
L2 Cache 512 KBytes, 8-way set associative, 64 Bytes line size  
L2 Speed 2604.7 MHz (Full)  
L2 Location On Chip  
L2 Data Prefetch Logic yes  
L2 Bus Width 256 bits  

Motherboard manufacturer Uniwill    
Motherboard model 755IA5,  
BIOS vendor American Megatrends Inc.  
BIOS revision 1.03  
BIOS release date 08/01/2003  
Chipset Intel i845PE rev. B1  
Southbridge Intel 82801DB (ICH4) rev. 02  
[/guote]
 
Graphic Interface AGP  
[quote]
AGP Status enabled, rev. 2.0  
AGP Data Transfer Rate 4x  
AGP Max Rate 4x  
AGP Side Band Addressing supported, enabled  
AGP Aperture Size 256 MBytes  

DRAM Type DDR-SDRAM  
DRAM Size 1024 MBytes  
DRAM Frequency 162.8 MHz  
FSB:DRAM 4:5  
CAS# Latency 2.5 clocks  
RAS# to CAS# 3 clocks  
RAS# Precharge 3 clocks  
Cycle Time (TRAS) 7 clocks  
DRAM Idle Timer 16 clocks  
# of memory modules 2  
Module 0 DDR-SDRAM PC3200 - 512 MBytes  
Module 1 DDR-SDRAM PC3200 - 512 MBytes  

   Bios  - AMILO D7830  - AMILO D7830  
 
  Titre:  BIOS Flash (ISO CD-Image) - AMILO D7830 / D8830  
  Date:  20.11.2003  
Taille:  1496 kB  
Version:  1.08c    
Fabricant:  FSC  
  Etat:  Commercialisé pour AMILO D7830  
  Description de l´installation:  *******************************************
*                                         *
*  BIOS Flash-update for Fujitsu Siemens  *
* AMILO D-7830, 8830              ...  
En savoir plus    
 Description de l´installation: *******************************************
*                                         *
*  BIOS Flash-update for Fujitsu Siemens  *
* AMILO D-7830, 8830                *
*  Product.Nr: 811 00218x                 *
*  *
*******************************************
 
!! Connect AC adapter befor flashing !!
!! Be sure that the Battery is full loaded !!
 
I. BIOS Flash update in DOS-mode:
---------------------------------
After running %EXEFILENAME% the floppy disk should contain following files:
 
flash.bat
F82743G.EXE
755IAC.108
readme.bat
readme.txt (this file)
 
!! Please reboot your system after flashing !!
 
II. BIOS Flash update from WINDOWS:
-----------------------------------
Download the %WINFLASH% and save it at the WINDOWS desktop or to a folder
you like.
!!Close all programms and applications!!
To flash your BIOS run %WINFLASH% by a double-click.
 
current BIOS 1.08C:
 
Solved problems:
- Support for D1 Stepping Portability CPU added.
Known errors, problems and restrictions:
- The time needed by the system from power on until the POST Logo appears is about 9 seconds.
 That means the user will see a black screen during this time and might be irritated.
- The Portability CPU is shown as “Mobile Intel Pentium 4” in the BIOS setup and WinXP System Properties,
 but the system does not support the Intel speedstep technology. This might confuse the customers.
Additional information:
- none
***************************************************************************************
predecessor 1.07C:
 
Solved problems:
- Support for Hynix and Nanya RAM modules added.
- Support for Portability CPU added.
- Solved the problem, that some garbage could be seen on Samsung LCD panels during POST and Boot Logo.
- Solve can't power on at battery mode sometimes.
Known errors, problems and restrictions:
- The time needed by the system from power on until the POST Logo appears is about 9 seconds.
 That means the user will see a black screen during this time and might be irritated.
- The Portability CPU is shown as “Mobile Intel Pentium 4” in the BIOS setup and WinXP System Properties,
 but the system does not support the Intel speedstep technology. This might confuse the customers.
Additional information:
- none
***************************************************************************************
predecessor 1.05C:
Solved problems:
- Support for master password utility implemented.
- Solved the problem, that the system didn’t respond anymore when the AC-Adapter
 is removed immediately after changing the power scheme (WinXP).  
 
Known errors, problems and restrictions:
- The time needed by the system from power on until the POST Logo appears is about 9 seconds. That means
 the user will see a black screen during this time and might be irritated.
- This BIOS version supports only Samsung and Infinion PC2700 256 MB and 512 MB DDR memory modules.
Additional information:
- none
***************************************************************************************
predecessor 1.04C:
Solved problems:
- No customer relevant changes.
 
Known errors, problems and restrictions:
- The time needed by the system from power on until the POST Logo appears is about 9 seconds. That means
 the user will see a black screen during this time and might be irritated.
- This BIOS version supports only Samsung and Infinion PC2700 256 MB and 512 MB DDR memory modules.
Additional information:
- none
***************************************************************************************
predecessor 1.03C:
Solved problems:
- After resume from hibernate there might be some garbage on the screen with earlier bios versions.
- Bios settings for the parallel port will now take effect in the operating system.
 (Before always ECP was shown)
- For CPU temperatures below 50°C the fan controll was corrected.
 Symptom: After a warmboot the fan was switched on, even the CPU temperatue was too low.
 Over 50°C the fan control had no problems.
- Now also Infineon memory modules (PC2700 256 MB and 512 MB DDR) are supported.
- Torisan SXGA+ LCD panel has a filcker problem at resolution 1152x864 with earlier bios versions.
- The system will not be switched off after flash process in DOS mode any more. It has to be done manually..
Known errors, problems and restrictions:
- The time needed by the system from power on until the POST Logo appears is about 9 seconds. That means
 the user will see a black screen during this time and might be irritated.
- This BIOS version supports only Samsung and Infinion PC2700 256 MB and 512 MB DDR memory modules.
Additional information:
- none  
Réduire    
  Utilisation dans les produits suivants: AMILO D7830  
AMILO D8830