salut!
J'ai une carte Wifi Broadcom en PCMCIA(carte de la freebox) et mandrake 10.1
Pour la configurer j'ai fait :
- Installation de ndiswrapper,
- ndiswrapper -i bcmwl5.inf
- Quan je fait :
# ndiswrapper -l  
HARDWARE NOT PRESENT <-//Il me dis ça (avec la version 0.9)
avec les version 0.10,0.11,0.12 il marque
DRIVER LOADED
 
- Ensuite je fait :
# modprobe ndiswrapper
Et il ne m'affiche pas d'erreur (rien du tout d'ailleur)
 
juste a la fin dmesg marque:
ndiswrapper version 0.9 loaded
ndiswrapper: driver bcmwl5.sys added
 
 
- Et quan je fait :
# iwconfig
il met :
lo no wireless extensions.
 
eth0 no wireless extensions.
 
sit0 no wireless extensions.
 
Et donc je n'arrive pas a avoir le wlan0 pour le configurer.
 
De plus ma carte n'a pas son voyant vert d'allumé, alors que ceux sont bien les bon drivers car je les utilise avec winxp
 
Pouvez vous m'aider.
 
Merci par avance
 
 
 
 

je te remercie mais je ne comprend pas tout!!!
 
0.4 sur le 10.0 ?!!! que représente 0.4
 
 
Ensuite tu mets les sources du noyau, tu linkes sur /lib/modules/VERSION/build. ===> Quelles sources???
 
linkes????
 
que fait ndiswrapper -m car moi ca m'indique une erreur

desolé mais ca ne marche tj pas, la carte PCMCIA ne fonctionne tj pas  
:-(
je ne sais plus koi faire

bin je fais tout ce ki é indiké mé le carte ne sallume pas, mais aucune erreur :-(

de plus le fichier ifcfg-wlan0 je ne l'avais pas donc j'ai du le créer , c normal?

quand je tappe ces commande j'ai:
#ndiswrapper -m
modprobe config already contains alias directive
 
#ndiswrapper -l
installed ndis drivers:
bcmwl5  present
 
- Et quan je fait :
# iwconfig
il met :
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
sit0 no wireless extensions.  

voici ce que di dmesg a la fin, c les seules erreur que je trouve
 
 
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:02:03.0 [144d:c008]
Yenta: ISA IRQ mask 0x0018, PCI irq 10
Socket status: 30000810
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
inserting floppy driver for 2.6.8.1-10mdk
floppy0: no floppy controllers found
inserting floppy driver for 2.6.8.1-10mdk
floppy0: no floppy controllers found
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 17
ndiswrapper version 0.12 loaded (preempt=no,smp=no)
ndiswrapper: driver bcmwl5 (Broadcom,07/17/2003, 3.30.15.0) added
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49557 usecs
intel8x0: clocking to 48000
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0323b60(lo)
IPv6 over IPv4 tunneling driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized i830 1.3.2 20021108 on minor 0:
mtrr: base(0x88020000) is not aligned on a size(0x180000) boundary
eth1: no IPv6 routers present
SCSI subsystem initialized
st: Version 20040403, fixed bufsize 32768, s/g segs 256
    ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1.BAST] (Node df73a1a0), AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._Q66] (Node df6bde20), AE_BAD_PARAMETER
inserting floppy driver for 2.6.8.1-10mdk
floppy0: no floppy controllers found
inserting floppy driver for 2.6.8.1-10mdk
floppy0: no floppy controllers found
inserting floppy driver for 2.6.8.1-10mdk
floppy0: no floppy controllers found
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
cdrom: This disc doesn't have any tracks I recognize!
    ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1.BAST] (Node df73a1a0), AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._Q66] (Node df6bde20), AE_BAD_PARAMETER
    ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1.BAST] (Node df73a1a0), AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._Q66] (Node df6bde20), AE_BAD_PARAMETER
    ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1.BAST] (Node df73a1a0), AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._Q66] (Node df6bde20), AE_BAD_PARAMETER
    ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1.BAST] (Node df73a1a0), AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._Q66] (Node df6bde20), AE_BAD_PARAMETER
    ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1.BAST] (Node df73a1a0), AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._Q66] (Node df6bde20), AE_BAD_PARAMETER

voici aprés reinstallation(marche tj pas)
 
dmesg :
 
sda: assuming drive cache: write through
 /dev/scsi/host4/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi4, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi4, channel 0, id 0, lun 0,  type 0
USB Mass Storage device found at 7
    ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1.BAST] (Node df73a1a0), AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._Q66] (Node df6bde20), AE_BAD_PARAMETER
    ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1.BAST] (Node df73a1a0), AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._Q66] (Node df6bde20), AE_BAD_PARAMETER
    ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1.BAST] (Node df73a1a0), AE_BAD_PARAMETER
    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._Q66] (Node df6bde20), AE_BAD_PARAMETER
ndiswrapper version 0.12 loaded (preempt=no,smp=no)
ndiswrapper: driver bcmwl5 (Broadcom,07/17/2003, 3.30.15.0) added
cs: memory probe 0xa0000000-0xa0ffffff: clean.
[root@OCEANE ndiswrapper-0.12]#

Les drivers que tu charges, c'est pas pour la carte de la Freebox mais pour la carte de ton PC...
 
On est obligé de mettre la dernière version de ndiswrapper ? Car ma 10.1 community me fournit la 0.9 via urpmi...
Sinon peut-on installer un RPM de Cooker ?