# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)',
# ---------------       `install-mbr(8)', `/usr/share/doc/lilo/',
#                       and `/usr/share/doc/mbr/'.
 
# +---------------------------------------------------------------+
# |                        !! Reminder !!                         |
# |                                                               |
# | Don't forget to run `lilo' after you make changes to this     |
# | conffile, `/boot/bootmess.txt', or install a new kernel.  The |
# | computer will most likely fail to boot if a kernel-image      |
# | post-install script or you don't remember to run `lilo'.      |
# |                                                               |
# +---------------------------------------------------------------+
 
# Support LBA for large hard disks.
#
lba32
 
# Overrides the default mapping between harddisk names and the BIOS'
# harddisk order. Use with caution.
#disk=/dev/hde
#    bios=0x81
 
#disk=/dev/sda
#    bios=0x80
 
# Specifies the boot device.  This is where Lilo installs its boot
# block.  It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/hda
 
# Specifies the device that should be mounted as root. (`/')
#
root=/dev/hda6
 
# Enable map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the
# map smaller.  Using `compact' is especially recommended when
# booting from a floppy disk.  It is disabled here by default
# because it doesn't always work.
#
# compact
 
# Installs the specified file as the new boot sector
# You have the choice between: bmp, compat, menu and text
# Look in /boot/ and in lilo.conf(5) manpage for details
#
install=/boot/boot-menu.b
 
# Specifies the location of the map file
#
map=/boot/map
 
# You can set a password here, and uncomment the `restricted' lines
# in the image definitions below to make it so that a password must
# be typed to boot anything but a default configuration.  If a
# command line is given, other than one specified by an `append'
# statement in `lilo.conf', the password will be required, but a
# standard default boot will not require one.
#
# This will, for instance, prevent anyone with access to the
# console from booting with something like `Linux init=/bin/sh',
# and thus becoming `root' without proper authorization.
#
# Note that if you really need this type of security, you will
# likely also want to use `install-mbr' to reconfigure the MBR
# program, as well as set up your BIOS to disallow booting from
# removable disk or CD-ROM, then put a password on getting into the
# BIOS configuration as well.  Please RTFM `install-mbr(8)'.
#
# password=tatercounter2000
 
# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=20
 
# You can put a customized boot message up if you like.  If you use
# `prompt', and this computer may need to reboot unattended, you
# must specify a `timeout', or it will sit there forever waiting
# for a keypress.  `single-key' goes with the `alias' lines in the
# `image' configurations below.  eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
prompt
timeout=150
# prompt
# single-key
# delay=100
# timeout=100
 
# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode> )
#
# vga=ask
# vga=9
#
vga=normal
 
# Kernel command line options that apply to all installed images go
# here.  See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=""
 
# Boot up Linux by default.
#
default=Linux
 
image=/vmlinuz
 label=Linux
 read-only
# restricted
# alias=1
 
image=/vmlinuz.old
 label=LinuxOLD
 read-only
 optional
# restricted
# alias=2
 
# If you have another OS on this machine to boot, you can uncomment the
# following lines, changing the device name on the `other' line to
# where your other OS' partition is.
#
 
other=/dev/hda1
 label="Windows(hda1)"
 change
 
 

total 5727
drwxr-xr-x    2 root     root          520 Dec 24 14:30 .
drwxr-xr-x   24 root     root          648 Dec 24 14:29 ..
-rw-r--r--    1 root     root       559088 Nov  4 00:35 System.map-2.4.18-bf2.4
-rw-r--r--    1 root     root       745216 Nov 23 22:02 System.map-2.6.9
-rw-r--r--    1 root     root          512 Nov  4 00:41 boot.0300
lrwxrwxrwx    1 root     root           11 Nov  4 00:41 boot.b -> boot-menu.b
-rw-r--r--    1 root     root      1474560 Nov 27 21:19 boot.img
-rw-r--r--    1 root     root       308326 Dec 11 09:44 coffee.bmp
-rw-r--r--    1 root     root        16984 Nov  4 00:35 config-2.4.18-bf2.4
-rw-r--r--    1 root     root        34247 Nov 23 22:03 config-2.6.9
lrwxrwxrwx    1 root     root           15 Nov  4 15:50 debian.bmp -> /boot/sarge.bmp
-rw-r--r--    1 root     root       153720 Dec 11 09:44 debianlilo.bmp
-rw-------    1 root     root        43008 Dec 24 14:30 map
-rw-r--r--    1 root     root        23662 Dec 11 09:44 sarge.bmp
-rw-r--r--    1 root     root        24116 Dec 11 09:44 sid.bmp
-rw-r--r--    1 root     root      1263339 Nov  4 00:35 vmlinuz-2.4.18-bf2.4
-rw-r--r--    1 root     root      1190627 Nov 23 22:02 vmlinuz-2.6.9

lrwxrwxrwx    1 root     root           19 Nov 23 22:04 vmlinuz -> /boot/vmlinuz-2.6.9
lrwxrwxrwx    1 root     root           25 Nov  4 00:35 vmlinuz.old -> boot/vmlinuz-2.4.18-bf2.4

Warning : '/proc/partitions' does not match '/dev' directory structure
Name change : '/dev/clopp0' -> '/tmp/dev.0'
Warning : '/dev' directory structure is incomplete, device (240.0) is missing
Linux* add
LinuxOld add
Windows add