# XFree86 4 configuration created by pyxf86config
 
Section "ServerLayout"
 Identifier     "Default Layout"
 Screen      0  "Screen0" 0 0
 InputDevice    "Mouse0" "CorePointer"
 InputDevice    "Keyboard0" "CoreKeyboard"
 InputDevice    "DevInputMice" "AlwaysCore"
EndSection
 
Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the  
# file minus the extension (like ".txt" or ".db" ).  There is normally
# no need to change the default.
 
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
 
 RgbPath      "/usr/X11R6/lib/X11/rgb"
 FontPath     "unix/:7100"
EndSection
 
Section "Module"
 Load  "dbe"
 Load  "extmod"
 Load  "fbdevhw"
 Load  "glx"
 Load  "record"
 Load  "freetype"
 Load  "type1"
 Load  "dri"
EndSection
 
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds"  "1 2 3"
 
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
 
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
 
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
 Identifier  "Keyboard0"
 Driver      "keyboard"
 Option     "XkbRules" "xfree86"
 Option     "XkbModel" "pc105"
###<-------
 Option     "XkbLayout" "fr_CH"
###------->
EndSection
 
Section "InputDevice"
 Identifier  "Mouse0"
 Driver      "mouse"
 Option     "Protocol" "IMPS/2"
 Option     "Device" "/dev/psaux"
 Option     "ZAxisMapping" "4 5"
 Option     "Emulate3Buttons" "no"
EndSection
 
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
 Identifier  "DevInputMice"
 Driver      "mouse"
 Option     "Protocol" "IMPS/2"
 Option     "Device" "/dev/input/mice"
 Option     "ZAxisMapping" "4 5"
 Option     "Emulate3Buttons" "no"
EndSection
### <-------
Section "Monitor"                            
 Identifier   "Monitor0"
 VendorName   "Monitor Vendor"
 ModelName    "Sony CPD-E200/E200E"
 DisplaySize  330 240
 HorizSync    30.0 - 85.0
 VertRefresh  48.0 - 120.0
 Option     "dpms"
EndSection
### ------->
 
Section "Device"
 Identifier  "Videocard0"
 Driver      "vesa"
 VendorName  "Videocard vendor"
 BoardName   "VESA driver (generic)"
EndSection
 
Section "Screen"
 Identifier "Screen0"
 Device     "Videocard0"
 Monitor    "Monitor0"
 DefaultDepth     24
 SubSection "Display"
  Depth     24
  Modes    "1024x768" "800x600" "640x480"
 EndSubSection
EndSection
 
Section "DRI"
 Group        0
 Mode         0666
EndSection