MDK ne boot p.lus

MDK ne boot p.lus - Installation - Linux et OS Alternatifs

Marsh Posté le 11-07-2003 à 07:40:44    

Avant gt tt content j'avais mes 2 ordis ss MDK 9 et no pbs.
 
Maintenant

Reply

Marsh Posté le 11-07-2003 à 07:40:44   

Reply

Marsh Posté le 11-07-2003 à 07:42:29    

Je finis donc.
 
Maintenant ac un autre disque de 80G mandrake ne boot plus sur mon K6. Pourtant le DD est reconnus.
 
Il plante au niveau de la detection des partitions.
 
Qq'un aurait une ptte idée?

Reply

Marsh Posté le 11-07-2003 à 08:04:47    

eddy77 a écrit :

Je finis donc.
 
Maintenant ac un autre disque de 80G mandrake ne boot plus sur mon K6. Pourtant le DD est reconnus.
 
Il plante au niveau de la detection des partitions.
 
Qq'un aurait une ptte idée?


donne le message d'erreur. tu peux obtenir un shell ou bien c'est planté de chez planté ?

Reply

Marsh Posté le 11-07-2003 à 08:15:08    

ben ca plante dur et bouge pas.
Ms voila ce que je vois qd mon ordi demarre:
 
 
hda: WDC AC310200R, ATA DISK drive
hdb: ST340824A, ATA DISK drive
hdc: LTN382, ATAPI CDROM drive
hdd: SAMSUNG SP0802N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC310200R, 9787MB w/512kB Cache, CHS=1247/255/63
hdb: ST340824A, 38166MB w/2048kB Cache, CHS=4865/255/63
hdd: SAMSUNG SP0802N, 76351MB w/2048kB Cache, CHS=9733/255/63
hdc: ATAPI 40X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x.c 18Feb01 Donald Becker and others http://www.scyld.com/network/vortex.html
pcnet32.c: PCI bios is present, checking for devices...
rtl8139.c:v1.07 5/6/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
eth0: RealTek RTL8139 Fast Ethernet at 0xd800, IRQ 10, 00:50:fc:8c:7a:ee.
eth1: RealTek RTL8139 Fast Ethernet at 0xd400, IRQ 11, 00:40:f4:25:39:1f.
via-rhine.c:v1.08b-LK1.0.1 12/14/2000  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
 hdd:
 
Et pr hdd il bouge plus :(

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed