Script started on Thu Mar 18 14:32:46 2004
bum:/home/max# smartctl -a /dev/hda
smartctl version 5.26 Copyright (C) 2002-3 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
 
=== START OF INFORMATION SECTION ===
Device Model:     WDC WD800BB-00CAA0
Serial Number:    WD-WMA8E1433111
Firmware Version: 16.06V16
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   5
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Thu Mar 18 14:32:56 2004 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity was
     suspended by an interrupting command from host.
     Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
     without error or no self-test has ever  
     been run.
Total time to complete Offline  
data collection:    (3120) seconds.
Offline data collection
capabilities:     (0x3b) SMART execute Offline immediate.
     Auto Offline data collection on/off support.
     Suspend Offline collection upon new
     command.
     Offline surface scan supported.
     Self-test supported.
     Conveyance Self-test supported.
     No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
     power-saving mode.
     Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
     No General Purpose Logging support.
Short self-test routine  
recommended polling time:   (   2) minutes.
Extended self-test routine
recommended polling time:   (  58) minutes.
Conveyance self-test routine
recommended polling time:   (   5) minutes.
 
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   180   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   104   088   021    Pre-fail  Always       -       3866
  4 Start_Stop_Count        0x0032   099   099   040    Old_age   Always       -       1247
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   253   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       7889
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1021
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       1
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       18
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0
 
SMART Error Log Version: 1
ATA Error Count: 17 (device log contains only the most recent five errors)
 CR = Command Register [HEX]
 FR = Features Register [HEX]
 SC = Sector Count Register [HEX]
 SN = Sector Number Register [HEX]
 CL = Cylinder Low Register [HEX]
 CH = Cylinder High Register [HEX]
 DH = Device/Head Register [HEX]
 DC = Device Command Register [HEX]
 ER = Error register [HEX]
 ST = Status register [HEX]
Timestamp = decimal seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.
 
Error 17 occurred at disk power-on lifetime: 1059 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 0f 10 00 e0
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  40 00 01 0f 10 00 e0 00     323.650  READ VERIFY SECTOR(S)
  40 00 02 11 10 00 e0 00     323.650  READ VERIFY SECTOR(S)
  40 00 02 0f 10 00 e0 00     321.000  READ VERIFY SECTOR(S)
  40 00 04 13 10 00 e0 00     320.950  READ VERIFY SECTOR(S)
  40 00 04 0f 10 00 e0 00     318.500  READ VERIFY SECTOR(S)
 
Error 16 occurred at disk power-on lifetime: 1059 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 02 0f 10 00 e0
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  40 00 02 0f 10 00 e0 00     321.000  READ VERIFY SECTOR(S)
  40 00 04 13 10 00 e0 00     320.950  READ VERIFY SECTOR(S)
  40 00 04 0f 10 00 e0 00     318.500  READ VERIFY SECTOR(S)
  40 00 08 17 10 00 e0 00     318.450  READ VERIFY SECTOR(S)
  40 00 08 0f 10 00 e0 00     315.750  READ VERIFY SECTOR(S)
 
Error 15 occurred at disk power-on lifetime: 1059 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 04 0f 10 00 e0
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  40 00 04 0f 10 00 e0 00     318.500  READ VERIFY SECTOR(S)
  40 00 08 17 10 00 e0 00     318.450  READ VERIFY SECTOR(S)
  40 00 08 0f 10 00 e0 00     315.750  READ VERIFY SECTOR(S)
  40 00 10 0f 10 00 e0 00     313.250  READ VERIFY SECTOR(S)
  40 00 10 ff 0f 00 e0 00     313.250  READ VERIFY SECTOR(S)
 
Error 14 occurred at disk power-on lifetime: 1059 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 0f 10 00 e0
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  40 00 08 0f 10 00 e0 00     315.750  READ VERIFY SECTOR(S)
  40 00 10 0f 10 00 e0 00     313.250  READ VERIFY SECTOR(S)
  40 00 10 ff 0f 00 e0 00     313.250  READ VERIFY SECTOR(S)
  40 00 20 1f 10 00 e0 00     313.250  READ VERIFY SECTOR(S)
  40 00 20 ff 0f 00 e0 00     310.600  READ VERIFY SECTOR(S)
 
Error 13 occurred at disk power-on lifetime: 1059 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 10 0f 10 00 e0
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  40 00 10 0f 10 00 e0 00     313.250  READ VERIFY SECTOR(S)
  40 00 10 ff 0f 00 e0 00     313.250  READ VERIFY SECTOR(S)
  40 00 20 1f 10 00 e0 00     313.250  READ VERIFY SECTOR(S)
  40 00 20 ff 0f 00 e0 00     310.600  READ VERIFY SECTOR(S)
  40 00 40 ff 0f 00 e0 00     308.200  READ VERIFY SECTOR(S)
 
SMART Self-test log structure revision number 1
No self-tests have been logged.  [Use the smartctl -t option to run these.]
 
 
bum:/home/max#  
Script done on Thu Mar 18 14:33:08 2004