Bonjour à tous,
 
J'ai deux question sur cette cam ou même sur les autres de la marque.
Je voudrais utiliser la cam afin d'avoir toujours un oeil sur ce qui se passe dans une salle d'attente. L'idée : quand quelqu'un entre que je sois prévenu facilement (pas par email) via mon smartphone android et que celui-ci allume l'écran (sortie de veille) afin que j'ai l'image directement quand détection d'un mouvement et/ou d'un bruit. Est-ce possible avec cette cam.
J'ai vu les Heden et Dericam également. Le font-elles aussi. Sont-elles de meilleure qualité ou plus faciles à paramétrer ?
Super merci d'avance,
 
Chihuahua

Bonjour
un topic unique est déjà ouvert pour le même type de camera IP (FI9820W)

http://forum.hardware.fr/hfr/Hardw [...] 7581_1.htm

l'idéal est de poser ta question sur ce topic déjà ouvert afin d'éviter d'ouvrir un topic pour chaque question posée....
peut être déjà traitée...

MERCI de ta compréhension

Merci,
 
Je m'empresse de ce pas de le faire

 
It should be noted that the FI9821W is NOT the same hardware as the FI9820W. It is using a different SoC and Chip. Therefore anything that works for the FI9820W, will not and does not work for this camera model.
 
While I don't have a solution to your request. I have created a free Interface for this camera model that works with ANY Internet browser capable device that is using any Operating System from any browser. From Computers to Tablets and Phones To TVs.
 
There are also many Live Demos and one of those Live Demos also allows you to use your own FI9821W cameras with the free Interface, without the need to first download, install and configure a copy of the free Interface, which is suggested for long term use.
 
More here: http://foscam.us/forum/free-generi [...] tml#p20338
 
It should be noted that this interface will also work with the FI9801W and FI9802W camera models, which are also new and also use different hardware and firmware, then the FI9820W cameras.
 
Foscam for the first time, is actually designing and creating the firmware for these new camera models in-house and not using 3rd parties to create the firmware for these camera models, as they have in the past, for ALL prior Foscam IP Camera models.
 
More here about that: http://foscam.us/forum/fi9821w-iss [...] tml#p19888
 
I have much more information on the internals of these cameras for both the hardware and firmware, which I can go into if needed. Here is some basic information:
 
http://foscam.us/forum/fi9821w-fi9 [...] tml#p18973
 
Don