[HDD SATA] WD Green - SMART Values différences ?

WD Green - SMART Values différences ? [HDD SATA] - Disque dur - Hardware

Marsh Posté le 16-06-2016 à 14:45:32    

Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE  
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0  
3 Spin_Up_Time 0x0027 180 141 021 Pre-fail Always - 7983  
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2608  
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0  
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0  
9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16565  
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0  
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0  
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1059
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 1046
193 Load_Cycle_Count 0x0032 165 165 000 Old_age Always - 105401
194 Temperature_Celsius 0x0022 127 089 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 7
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1


 
Bonjour,
je me demande à quoi correspondent exactement les valeurs suivantes :
UDMA_CRC_Error_Count  
Multi_Zone_Error_Rate
 
Quelle est la différence entre :
Spin_Up_Time et Power_On_Hours ?
 
Et pourquoi le Load_Cycle_Count est si élevé ?
 
Disque de 3 ans d'âge, au moins.
:jap:


---------------
Hergestellt in der Schweiz.
Reply

Marsh Posté le 16-06-2016 à 14:45:32   

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed