voila je vais peut-etre vendre 2 carte scsi fibre optique
compatible nt4 2000 xp
caracteristique:
64BIT 33MHZ PCI FIBRE CHANNEL HOST BUS ADAPTER USING AGILENT'S HPFC-5100 TACHYON TL CHIP  
 
SUPPORTS TRANSFER RATES OF UP TO 100 MBYTES/SEC (HALF DUPLEX) AND 200MBYTES/SEC (FULL DUPLEX) (FULL DUPLEX IS ONLY SUPPORTED IF ALL DEVICES ON THE LOOP SUPPORT FULL DUPLEX)  
 
ONE GBIC SLOT TO SUPPORT ALL EXISTING FIBRE CHANNEL GBICS  
 
SUPPORTS MICROSOFT CLUSTER SERVICES 1.0 AND 2.0; NETWARE CLUSTER SERVICES 5.0 AND 5.1  
 
BURST TRANSFER RATE 264 MBYTES/SECOND GUARANTEED FOR LENGTH OF FRAME INBOUND & OUTBOUND AT 64-BIT 33 MHZ  
 
SUPPORTS: POINT-TO-POINT; ARBITRATED LOOP PUBLIC AND PRIVATE; SWITCHED CIRCUIT; FABRIC (F- AND FL-LOGIN)  
 
SUPPORTS CLASS 3 UPPER LAYER PROTOCOL SCSI FCP - ON-CHIP AUTOMATION OF COMPLETE SCSI I/O LOOP INITIALIZATION. COMPLETELY HARDWARE-BASED FOR HIGH AVAILABILITY  
 
HARDWARE BASED HBA FAILOVER (REQUIRES TWO HBAS)  
 
SUPPORTS SIMPLE STORAGE SAN STORAGE AND SAN BACKUP  
 
SUPPORTS BOTH STORAGE AND BACKUP ON THE SAME LOOP SWITCH AND/OR FABRIC (HP FIBRE CHANNEL PRODUCTS ONLY)  
 
LOOP MAP LOOP DIRECTED RESET LOOP BROADCAST  
 
LINK STATUS INDICATORS INTERNAL/EXTERNAL LOOPBACK  
 
COMPLIANCE FC-PH FC-AL FC-PLDA FCP-SCSI  
 
SUPPORTS DUAL ADDRESS CYCLE SUPPORT  
 
ZERO WAIT STATE MULTIPLE CACHE LINE BURSTING CAPABLE UP TO FULL FRAME SIZE 32-BYTE CACHE LINE  
 
SIX DMA CHANNELS  
 
AUTOMATION OF COMPLETE I/O ON-CHIP IN HARDWARE RESULTS IN LOWEST LATENCY & I/O OVERHEAD AND HIGHEST LEVELS OF PARALLELISM  
 
HALF LENGTH PCI CARD  
 
 
voila j'ai aussi 2 cable de 3metre