[VDS][LILLE METROPOLE] Cisco 2621 & 2924

Cisco 2621 & 2924 [VDS][LILLE METROPOLE] - Hardware - Achats & Ventes

Marsh Posté le 30-08-2005 à 10:38:11    

Cisco 2621
 
[img=http://img388.imageshack.us/img388/6007/cisco26000023jg.th.jpg]
 
[img=http://img388.imageshack.us/img388/7273/cisco26000015qb.th.jpg]
 
[img=http://img388.imageshack.us/img388/6546/cisco26000035na.th.jpg]
 
 
[img=http://img388.imageshack.us/img388/8890/cisco26000046su.th.jpg]
 
[img=http://img388.imageshack.us/img388/1438/cisco26000058ei.th.jpg]
 
[img=http://img388.imageshack.us/img388/7613/cisco26000061pk.th.jpg]
 
[img=http://img388.imageshack.us/img388/3698/cisco26000071gi.th.jpg]
 

Code :
  1. sh ver
  2. Cisco Internetwork Operating System Software
  3. IOS (tm) C2600 Software (C2600-IS56I-M), Version 12.1(7), RELEASE SOFTWARE (fc1)
  4. Copyright (c) 1986-2001 by cisco Systems, Inc.
  5. Compiled Thu 22-Feb-01 14:13 by kellythw
  6. Image text-base: 0x80008088, data-base: 0x80DEB9C4
  8. ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
  10. Cisco2621 uptime is 7 minutes
  11. System returned to ROM by reload
  12. System image file is "flash:c2600-is56i-mz.121-7.bin"
  14. cisco 2621 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of memory.
  15. Processor board ID JAD0430005H (163510750)
  16. M860 processor: part number 0, mask 49
  17. Bridging software.
  18. X.25 software, Version 3.0.0.
  19. 1 Ethernet/IEEE 802.3 interface(s)
  20. 2 FastEthernet/IEEE 802.3 interface(s)
  21. 32K bytes of non-volatile configuration memory.
  22. 8192K bytes of processor board System flash (Read/Write)
  24. Configuration register is 0x2102
  26. Cisco2621#sh int
  27. FastEthernet0/0 is administratively down, line protocol is down
  28.   Hardware is AmdFE, address is 0002.fd24.eea0 (bia 0002.fd24.eea0)
  29.   MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
  30.      reliability 255/255, txload 1/255, rxload 1/255
  31.   Encapsulation ARPA, loopback not set
  32.   Keepalive set (10 sec)
  33.   Auto-duplex, Auto Speed, 100BaseTX/FX
  34.   ARP type: ARPA, ARP Timeout 04:00:00
  35.   Last input never, output never, output hang never
  36.   Last clearing of "show interface" counters never
  37.   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  38.   Queueing strategy: fifo
  39.   Output queue :0/40 (size/max)
  40.   5 minute input rate 0 bits/sec, 0 packets/sec
  41.   5 minute output rate 0 bits/sec, 0 packets/sec
  42.      0 packets input, 0 bytes
  43.      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
  44.      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
  45.      0 watchdog
  46.      0 input packets with dribble condition detected
  47.      0 packets output, 0 bytes, 0 underruns
  48.      0 output errors, 0 collisions, 0 interface resets
  49.      0 babbles, 0 late collision, 0 deferred
  50.      0 lost carrier, 0 no carrier
  51.      0 output buffer failures, 0 output buffers swapped out
  52. FastEthernet0/1 is administratively down, line protocol is down
  53.   Hardware is AmdFE, address is 0002.fd24.eea1 (bia 0002.fd24.eea1)
  54.   MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
  55.      reliability 255/255, txload 1/255, rxload 1/255
  56.   Encapsulation ARPA, loopback not set
  57.   Keepalive set (10 sec)
  58.   Auto-duplex, Auto Speed, 100BaseTX/FX
  59.   ARP type: ARPA, ARP Timeout 04:00:00
  60.   Last input never, output never, output hang never
  61.   Last clearing of "show interface" counters never
  62.   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  63.   Queueing strategy: fifo
  64.   Output queue :0/40 (size/max)
  65.   5 minute input rate 0 bits/sec, 0 packets/sec
  66.   5 minute output rate 0 bits/sec, 0 packets/sec
  67.      0 packets input, 0 bytes
  68.      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
  69.      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
  70.      0 watchdog
  71.      0 input packets with dribble condition detected
  72.      0 packets output, 0 bytes, 0 underruns
  73.      0 output errors, 0 collisions, 0 interface resets
  74.      0 babbles, 0 late collision, 0 deferred
  75.      0 lost carrier, 0 no carrier
  76.      0 output buffer failures, 0 output buffers swapped out
  77. Ethernet1/0 is administratively down, line protocol is down
  78.   Hardware is AmdP2, address is 0002.fd24.eeb0 (bia 0002.fd24.eeb0)
  79.   MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
  80.      reliability 255/255, txload 1/255, rxload 1/255
  81.   Encapsulation ARPA, loopback not set
  82.   Keepalive set (10 sec)
  83.   ARP type: ARPA, ARP Timeout 04:00:00
  84.   Last input never, output never, output hang never
  85.   Last clearing of "show interface" counters never
  86.   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  87.   Queueing strategy: fifo
  88.   Output queue :0/40 (size/max)
  89.   5 minute input rate 0 bits/sec, 0 packets/sec
  90.   5 minute output rate 0 bits/sec, 0 packets/sec
  91.      0 packets input, 0 bytes, 0 no buffer
  92.      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
  93.      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
  94.      0 input packets with dribble condition detected
  95.      0 packets output, 0 bytes, 0 underruns
  96.      0 output errors, 0 collisions, 0 interface resets
  97.      0 babbles, 0 late collision, 0 deferred
  98.      0 lost carrier, 0 no carrier
  99.      0 output buffer failures, 0 output buffers swapped out
  100. Cisco2621#


 
prix : 300€
edit : prix 200 €
 
 
pour le 2924XL (je mets les infos / photos ASAP (actuellement utilisé chz quelqu'un))
 
prix : 200€
edit : prix : 140€


Message édité par trax2539 le 31-08-2005 à 14:32:44
Reply

Marsh Posté le 30-08-2005 à 10:38:11   

Reply

Marsh Posté le 30-08-2005 à 23:03:07    

up :pt1cable:

Reply

Marsh Posté le 31-08-2005 à 14:33:26    

up maj du prix

Reply

Marsh Posté le 01-09-2005 à 12:34:32    

up

Reply

Marsh Posté le 04-09-2005 à 09:11:08    

Je propose 125 pour le routeur.
 
Désolé pour la propo, mais je n"ai pas de superbes finances.
Et comme j'ai envie de me lancé un peu dans cisco.
 
A débatre, bien sur.
 
Voilou.

Reply

Marsh Posté le 11-10-2005 à 18:09:05    

J'attends une réponse pour un autre 2600 series, si cela ne fonctionne pas, je suis pret à venir le chercher chez toi pour 160€ (j'habite Paris et j'ai pas de diesel ;) :D
Et suivant les finances(pov' chomeur que je suis) et l'utilité (car le 2924XL n'est plus vendu par cisco) je pourrais peut etre te prendre également le switch qui me servira pour le BCMSN.
 
Si bien sur, tout cela n'a pas été déjà vendu. ;)

Reply

Marsh Posté le 05-01-2007 à 14:46:54    

bonjour
 
je suis prêt à prendre le cisco 2621 pour 300 euros s'il est tjs en vente
 
cordialement

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed