[VDS 75/RP] Gigabyte EP35C-DS3R

Gigabyte EP35C-DS3R [VDS 75/RP] - Hardware - Achats & Ventes

Marsh Posté le 16-12-2010 à 20:12:11    


A vendre Gigabyte EP35C-DS3R 30€
 
 
lien du site constructeur:
http://www.gigabyte.fr/products/pr [...] id=2740#ov
 
Processeur  
 
   1. Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/ Intel® Pentium® processor Extreme Edition/Intel® Pentium® D processor/ Intel® Pentium® 4 processor Extreme Edition/Intel® Pentium® 4 processor/ Intel® Celeron® processor in the LGA 775 package
      (Go to GIGABYTE's website for the latest CPU support list.)
   2. L2 cache varies with CPU
   3. 1600 (O.C.)/1333/1066/800 MHz FSB  
 
Chipset  
 
   1. North Bridge: Intel® P35 Chipset
   2. South Bridge: Intel® ICH9R  
 
Mémoire 6 slots
DDR3:
   1. 2 x 1.5V DDR3 DIMM sockets supporting up to 4 GB of system memory
   2. Dual channel memory architecture
   3. Support for DDR3 1333/1066/800 MHz memory modules  
 
DDR2:
   1. 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory(Note 1)
   2. Dual channel memory architecture
   3. Support for DDR2 1200 (O.C.)/1066/800/667 MHz memory modules  
 
Please refer "Memory Support List" for memory support information.
Audio  
 
   1. Realtek ALC889A codec
   2. High Definition Audio
   3. 2/4/5.1/7.1-channel
   4. Support for S/PDIF In/Out
   5. Support for CD In  
 
Réseau  
 
   1. Realtek 8111B chip (10/100/1000 Mbit)  
 
Port d'expansion  
 
   1. 1 x PCI Express x16 slots
   2. 3 x PCI Express x1 slots
   3. 3 x PCI slots  
 
Dimensions  
 
   1. ATX (305 x 244mm)  
 
Interface de Stockage South Bridge:
 
   1. 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
   2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10  
 
GIGABYTE SATA2 chip:
 
   1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices - 2 x SATA 3Gb/s connectors (GSATAII0, GSATAII1) supporting up to 2 SATA 3Gb/s devices
   2. Support for SATA RAID 0, RAID 1, and JBOD  
 
iTE IT8718 chip:
 
   1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
 
USB  
 
   1. Integrated in the South Bridge
   2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)  
 
Connecteurs d'entrées/sorties internes  
 
   1. 1 x 24-pin ATX main power connector
   2. 1 x 4-pin ATX 12V power connector
   3. 1 x floppy disk drive connector
   4. 1 x IDE connector
   5. 8 x SATA 3Gb/s connectors
   6. 1 x CPU fan header
   7. 2 x system fan headers
   8. 1 x power fan header
   9. 1 x front panel header
  10. 1 x front panel audio header
  11. 1 x CD In connector
  12. 1 x S/PDIF In header
  13. 1 x S/PDIF Out header
  14. 2 x USB 2.0/1.1 headers
  15. 1 x parallel port header
  16. 1 x serial port header
  17. 1 x chassis intrusion header
  18. 1 x power LED header  
 
Connecteur du Panneau Arrière  
 
   1. 1 x PS/2 keyboard port
   2. 1 x PS/2 mouse port
   3. 1 x coaxial S/PDIF Out connector
   4. 1 x optical S/PDIF Out connector
   5. 8 x USB 2.0/1.1 ports
   6. 1 x RJ-45 port
   7. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)  
 
Contrôleur d'Entrée/Sortie  
 
   1. iTE IT8718 chip  
 
Monitorage Matériel  
 
   1. System voltage detection
   2. CPU/System temperature detection
   3. CPU/System/Power fan speed detection
   4. CPU overheating warning
   5. CPU/System/Power fan fail warning
   6. CPU fan speed control  
 
BIOS  
 
   1. Supports Virtual Dual BIOS Plus
   2. 2 x 8 Mbit flash ROM
   3. Use of licensed AWARD BIOS
   4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.  
 
Fonctionnalités Exclusives  
 
   1. Support for @BIOS
   2. Support for Download Center
   3. Support for Q-Flash
   4. Support for EasyTune
   5. Support for Xpress Install
   6. Support for Xpress Recovery2

Reply

Marsh Posté le 16-12-2010 à 20:12:11   

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed